Need an extra power point at home in Melbourne? EasyFixed gives you an instant online price for power point installation by a licensed electrician across Melbourne and surrounding suburbs. Tell us how many outlets and where they go, and get a fixed price inc GST in under a minute.
Licensed electrician, new indoor or outdoor outlet, certificate included.
Power for an automatic gate
The most common reason our customers book this service is a motorised gate. A gate motor needs a permanent weatherproof outlet near the motor housing, not a lead run from the garage.
We do not run that power as part of a gate install. At the gate site check we tell you exactly where the outlet needs to sit, then you either book this service or use your own licensed electrician so the work is done once, in the right place.
What changes the price
Distance from an existing point is the biggest factor. An outlet added beside one that already exists is quick. A run across the house through the roof space takes longer.
Wall type matters as well. Plasterboard is fast, solid brick and tile need chasing and making good. Outdoor outlets need a weatherproof enclosure and correct sealing, which adds cost over an indoor point.
If your switchboard has no spare capacity or lacks RCD protection, extra work may be required before a new circuit can be connected. The electrician will tell you before starting.
Why it has to be a licensed electrician
All fixed electrical work in Australia must be carried out by a licensed electrician. DIY wiring is illegal, dangerous, and can void your home insurance after a fault.
Every job we book includes testing and a Certificate of Electrical Safety, which is your record that the work meets the standard.
Much of Melbourne sits on reactive clay. Clay swells in winter and shrinks through summer, which works fence footings loose over the years. It is the single biggest reason posts lean here, and why we set footings deeper than the bare minimum.
Most Melbourne councils allow a boundary fence up to 2.0 metres between neighbours without a planning permit, with lower limits on street frontages. Heritage overlays across the inner suburbs add extra rules, so check with your council before going tall at the front.
Hot dry summers and wet winters are hard on timber. Expect to re-stain a paling fence every three to five years, and expect the north and west facing runs to weather first.
Housing ranges from period terraces and weatherboards in the inner suburbs to newer estates further out. Timber paling and Colorbond dominate back boundaries, while aluminium slat and blade fencing is the common choice on modern front boundaries.
Can you install an outdoor power point for a gate motor? Yes. We fit a weatherproof, RCD protected outlet rated for external use in the position confirmed at your site check.
How long does it take? A straightforward outlet near an existing point takes about an hour. A new circuit from the switchboard can take up to half a day.
Do I get paperwork? Yes. A Certificate of Electrical Safety is issued for the work, which is a legal requirement in Victoria.
Can I install one myself? No. Fixed electrical work must be done by a licensed electrician in Australia.
Get an instant quote